Ваш браузер устарел. Рекомендуем обновить его до последней версии.

RUSSIAN BIRCH PLYWOOD

Scanditrade Baltic OU is one of the leading companies market of deep wood processing, offering multiple solutions for industrial construction, house building, machinery construction, furniture manufacturing and other areas related with the birch plywood application.

 

Since the moment of its creation, one of the highest priorities of the company is offering such products and services that provide an absolute satisfaction of the needs of our customer.

 

This is being reached by the detailed research of the demands of our potential clients, flexibility, openness and the permanent readiness for dialogue as well.

 

 

INTERIOR PLYWOOD

EXTERIOR PLYWOOD

EXTERIOR PLYWOOD

INTERIOR PLYWOOD

FILM FACED PLYWOOD

BED SLATS

 

 

 

INTERIOR PLYWOOD - Technical specifications

 

Standard sizes, mm (ft) 1525х1525 (5х5)
2440/2500х1500/1525 (8x5)
Standard thickness, mm 3-25
Grading I (B, S), II (BB), III (CP), IV (C)
Surface quality Outer layers sanded (S2S), one side sanded (S1S), unsanded (NS)
Formaldehyde emission class Е1
Water resistance Normal
Density, kg/m3 640-700
Moisture content, % 5-14
Edge sealing

Produced under STO 00255177-001-2013 General purpose plywood with birch face veneers.

EXEXTERIOR PLYWOOD - Technical specifications

Standard sizes, mm (ft) 1525х1525 (5х5)
1220х2440х1220 (4х8х4)
1250х2500х1250 (4х8х4)
1500/1525x2440/2500 (5x8)
2440/2500х1500/1525 (8x5)
1500/1525х3000/3050 (5х10)
Standard thickness, mm 4-40
Grading I (B, S), II (BB), III (CP), IV (C)
Surface quality Outer layers sanded (S2S), one side sanded (S1S), unsanded (NS)
Formaldehyde emission class Е1
Water resistance Higher
Density, kg/m3 640-700
Moisture content, % 5-14
Edge sealing

FILM FACED PLYWOOD - Technical specifications

Standard sizes, mm (ft) 1220х2440х1220 (4х8х4)
1250х2500х1250 (4х8х4)
1500/1525x2440/2500 (5x8)
2440/2500х1500/1525 (8x5)
1500/1525х3000/3050 (5х10)
Standard thickness, mm 6-40
Film density, g/m2 120, 220
Surface quality Smooth (F/F), smooth/wire mesh (F/W)
Formaldehyde emission class Е1
Water resistance Higher
Density, kg/m3 640-700
Moisture content, % 5-14
Edge sealing Special waterproof acrylic based paint

PRODUCTS

 

Cross-grained and long-grained plywood.

Fiber direction of external veneer sheets of cross-grained plywood is perpendicular to the largest side of the plywood sheet.

 



Fiber direction of external veneer sheets of long-grained plywood is parallel to the largest side of the plywood sheet.



 

Specifications birch plywood

Plywood type

FSF, FOF (laminated plywood), cross-grained and long-grained

Veneers

100% birch

Names of plywood

S-FORM, S-RAW, S-MEL, S-WIRE, S-IRONBIRCH, S-COLOR  

Formats, mm

1220х2440/1250x2500 mm – 4х8

2440х1220, 2500х1250 mm – 8х4

1500х3000; 1525х3050 mm – 5х10

1220/1250х3000/3050 – 4х10

1500/1525х2400/2440/2500 mm – 5х8

Other formats are available upon request

Thickness

6 to 40 mm

Grades

B, S, BB, WGE, WG, CP, C, B/BB, B/CP, B/C, S/BB, BB/BB, BB/CP, BB/С, СР/С, СР/СР, С/С.

Surface treatment type

Not sanded (NS)

Sanded on both sides (S2S)

Laminated on both sides (FF)

Smooth surface on one side and mesh (wire) surface on the other side (FW)

Formaldehyde emission  

Е1

State standards, technical specifications

EN-13986:2004, TU 5513-002-93222532-2016, TU 5512-006-93222532-2016

 

Thickness birch plywood (mm)

fanera.png

 

Uncoated plywood grades

фанера.jpg

B Grade: Practical absence of defects. Standalone healthy intergrown knots up to 25 mm in diameter are allowed, or knot holes up to 5 mm in diameter.

BB Grade: Patched veneer is allowed: knots over 25 mm in diameter and visual defects.

CP Grade: Any number of veneer patches and discolorations is allowed.

CC Grade: Manufacturing flaws and wood structure defects are allowed. High quality gluing is guaranteed.

 

Plywood specifications

Physical and mechanical parameters

Parameter

Measurement unit

GOST 3916.1-96

EN

Actual value in 2014-2015

Ultimate split strength (bond strength)

MPa

1.0 or more

1.0 or more

2,2

Ultimate resistance to static bending along the external layer fibers

MPa

25.0 or more

47.0 or more

72,1

Ultimate resistance to static bending across the external layer fibers

MPa

N/a

38.0 or more

62,7

Modulus of elasticity for static bending along the external layer fibers

MPa

7000 or more

7000 or more

8571

Modulus of elasticity for static bending across the external layer fibers

MPa

N/a

3800 or more

6726

Moisture

%

5 to 10

7,2

Formaldehyde emission

Formaldehyde emission (emission grade E1)

GOST 3916.1-96

CARB

Actual value in 2014-2015

Gas analytical method, mg/m2*hr

Up to 3.5 inclusively, or less than 5.0 within 3 days after manufacture

Up to 0.36

0,13

Chamber method, mg/m3

Up to 0.124

N/a

0,005

 

 

Plywood assortment

 

S-RAW

S-RAW is sanded, uncoated, cross-grained and long-grained plywood. It is used in all spheres requiring heavy duty and at the same time lightweight materials, or demonstration of the good-looking birch wood structure.


S-WIRE

S-WIRE is plywood covered with 120-440 g/m2 phenol film with “mesh” coating. Coating colors are: dark-brown, black, grey, dark-spotted grey. Other colors are available upon request. Taber test wear resistance index is 400 to 2000.

S-WIRE is widely used in transport and flooring manufacture, as well as in other spheres requiring high wear resistance and anti-skid properties of materials.


S-FORM

S-FORM is plywood covered with 120-440 g/m2 phenol film with smooth coating. Coating colors are: dark-brown, black, light-brown, yellow. Other colors are available upon request. The butt-ends of the plywood are coated with water-resistance paint. Plywood with client’s logo can be manufactured.

S-FORM is used for monolithic construction, transport (walls), construction of agricultural buildings, as well as in other spheres requiring high durability, geometrical stability, corrosion resistance and extreme humidity resistance.


S-IRONBIRCH

S-IRONBIRCH is used in the spheres requiring good anti-skid properties and high surface durability such as bus flooring, industrial flooring, loading platforms, storage racks.


S - HEXA

S-HEXA is plywood coated with 120-220 g/m2 phenol or melamine film. The plywood surface has hexagonal structure. Its Taber test wear resistance index is 400 to 500. Possible colors of the surface are grey or brown.

S-HEXA is used in the spheres requiring good anti-skid properties and high surface durability, such as transport or warehouse flooring.


S-Сolor

S-COLOR is plywood coated with 120-220 g/m2 phenol film. Possible colors of the surface are: yellow, grey, green or red. Other colors are available upon request.

S-COLOR is used for furniture manufacturing, interior furnishing, transport and decoration.


S-MEL

S-MEL is plywood coated with 120-220 g/m2 melamine film. The surface structure is smooth or semi-transparent. The color of the surface is white. Other colors are available upon request.

S-MEL can be used in furniture manufacturing, interior furnishing, transport and other spheres where decorative properties of the material are important.


S-LNG

S-LNG is a non-overlaid plywood of increased strength properties with face layers of BB or WG veneer and internal layers made of veneer, meeting the increased requirements for the quantity and types of admissible defects. This type of plywood is manufactured in accordance with the higher requirements established for the products used in the production of LNG tankers intended for the transport of liquefied natural gas (it is used in the isolation systems of membrane tanks).

S-LNG plywood outstands a high level of pressure and maintains dimensional stability under the influence of extremely low temperature (up to -160 ° C). 

Certification of S-LNG  is under development

We are able to deliver according to

DAP DDP CIF CFR

DAP DDP CFR

  • Scanditrade Baltic birch plywood is delivered by various types of transport including motor transport, marine or railway transport.
  • Scanditrade Baltic well-developed logistic system enables it to deliver plywood to any part of the world, with guaranteed reliability of delivery schedule.
  • Scanditrade Baltic performs optimal loading of the products into transport according to each order.

STOCK

Standard loading norms:

30 m3 vehicles:

  • 400 mm packs: 24 or 25 packs
  • 600 mm packs: 16 or 17 packs

 40-feet container, 37 m3:

         400 mm packs: 31 or 32 packs

 20-feet container, 15 m3:

         400 mm packs: 15 or 16 packs

 75 to 90m3 railway car:

        400 mm packs: 76 packs

FSC

Email: info@baltic-wood.com

Tel: +372 660 17 09

Pargi tee 11, 75312, Peetri alevik, Rae vald, Harju maakond, Eesti Vabariik, Estonia

VAT: EE101853428

EORI: EE12979294

AC.numb (IBAN) EE821010220249703226

Bank name ASSEB Pank

Bank address Tornimae 2, 15010 Tallinn, Estonia

SWIFT EEUHEE2X

Fields marked with * are required.